January 5th, 2009


6' Wide Pleasure Island Docks
For our commercial marina customers we designed and manufactured our 6' wide system. This system was made to withstand the heavier traffic and boats that would be found in marina's. We also offer this system in a floating version.
The Above system is made of the following components
  • 6 x 16 Roll-In. This includes (2) 7' dock post, (2) dock wheels, all mounting hardware, (4) 4' x 6' red cedar panels (or optional vinyl panels) and our 6' x 16' dock frame
  • Shore post kit (starter kit). When the dock is not going to be attached to a sea wall or rested on the shore line this kit provides support at the shore end and includes (2) post, (2) pads and mounting hardware.
  • 8' Shore Ramp. The hinged shore ramp created a bridge from your dock system to the shoreline and can be hinged either up or down.







New Page 5

J&M Camper Sales • 653 Civic Center Dr • Augusta, Maine 04330

"Quality Products & Service By The Stoddard Family Since 1967"

Copyright 1967-2007 J&M Camper Sales Inc. - All Rights Reserved

The content of this site remains the property of J&M Camper Sales Inc. Everything published on this site was the current at the time of publication. J&M Camper Sales, it's employees nor it's web master are not responsible for typographical errors, changes in specifications or any material printed below this web site outline.